Mitsubishi Electric FR-A800, Instruction Manual

Page: 96 / 1042

Connection of motor with encoder (vector control) Installation and wiring
2 - 66
●
When using an encoder cable (FR-JCBL, FR-V5CBL, etc.) dedicated to the conventional motor, cut
the crimping terminal of the encoder cable and strip its sheath to make its cable wires loose.
Also, treat the shielding wires of the shielded twisted pair cable to ensure that they will not contact
conductive areas.
Wire the stripped cable after twisting it to prevent it from becoming loose. In addition, do not
solder it.
I002397E
Fig. 2-47: Preparation of the cable
NOTES Information on blade terminals
Commercially available products (as of January 2015)
●
Phoenix Contact Co., Ltd.
●
NICHIFU Co.,Ltd.
When using a blade terminal (without insulation sleeve), take caution that the twisted wires do
not come out.
Cable stripping size
5 mm
Terminal screw
size
Cable gauge
(mm
2
)
Blade terminal model
Crimping tool
name
With insulation sleeve Without insulation sleeve
M2 0.3, 0.5 AI 0,5-6WH A 0,5-6 CRIMPFOX 6
Terminal screw
size
Cable gauge
(mm
2
)
Blade terminal product
number
Insulation product number
Crimping tool
product number
M2 0.3 to 0.75 BT 0.75-7 VC 0.75 NH 69