Mitsubishi Electric FR-A800, Instruction Manual

Page: 511 / 1042

Parameters (M) Monitor display and monitor output signal
FR-A800 5 - 331
Input terminal
status
—
55
0
H0F
(
40215
(
Displays input terminal ON/OFF
state of the inverter. (Refer to
page 5-336 for DU display.)
Output terminal
status
—
H10
*
40216
*
Displays output terminal ON/OFF
state of the inverter. (Refer to
page 5-336 for DU display.)
Option input
terminal status
'
— 56 — — —
Displays input terminal ON/OFF
state of the digital input option
(FR-A8AX) on the DU.
(Refer to page 5-336 for details.)
Option output
terminal status
'
— 57 — — —
Displays output terminal ON/OFF
state of the digital output option
(FR-A8AY) and the relay output
option (FR-A8AR) on the DU.
(Refer to page 5-336 for details.)
Option input
terminal status 1
(for
communication)
'
— —
H3A
)
40258
)
Input terminal X0 to X15 ON/OFF
state of the digital input option
(FR-A8AX) can be monitored via
RS-485 communication and the
communication option.
Option input
terminal status 2
(for communica-
tion)
'
— —
H3B
3
40259
3
Input terminal DY ON/OFF state
of the digital input option
(FR-A8AX) can be monitored via
RS-485 communication and the
communication option.
Option output
terminal status 1
(for communica-
tion)
'
— —
H3C
-
40260
-
Output terminal ON/OFF state of
the digital output option
(FR-A8AY) and relay output
option (FR-A8AR) can be
monitored via RS-485
communication and the
communication option.
Motor thermal
load factor
0.1% 61 H3D 40261
Displays the accumulated heat
value of the motor thermal O/L
relay.
The motor overload trip (E.THM)
occurs at 100%.
Inverter thermal
load factor
0.1% 62 H3E 40262
Displays the accumulated heat
value of the inverter thermal O/L
relay.
The inverter overload trip (E.THT)
occurs at 100%.
PTC thermistor
resistance
0.01 kΩ 64 H40 40264
Displays the PTC thermistor
resistance when Pr. 561 "PTC
thermistor protection level" ≠
9999 (voltage monitor when
Pr. 561 = 9999).
PID measured
value 2
0.1% 67 H43 40267
Displays the PID control
measured value even if PID
control operating conditions are
not satisfied while the PID
control is enabled (Pr.128 ≠ "0").
(Refer to page 5-537)
Cumulative
pulse
'
— 71 H47 40271

1
The cumulative number of
pulses is displayed (monitor
range: –32767 to 32767)
(for FR-A8AP/FR-A8APR).
Cumulative
pulse overflow
times
'
— 72 H48 40272

1
The number of the cumulative
pulse carrying-over times is
displayed (for FRA8AP/
FR-A8APR).
Cumulative
pulse (control
terminal option)
'
— 73 H49 40273

1
The cumulative number of
pulses is displayed (monitor
range: –32767 to 32767)
(for FR-A8TP).
Types of
monitor
Unit
Pr. 52,
Pr. 774 to Pr. 776,
Pr. 992
RS-485
communica-
tion dedicat-
ed monitor
(hexadeci-
mal)
MODBUS
RTU real
time
monitor
Minus (-)
display
Description
Tab. 5-126: Monitor description list (4)