Mitsubishi Electric FR-A800, Instruction Manual

Page: 74 / 1042

Control circuit Installation and wiring
2 - 44
Crimp the blade terminal.
Insert wires to a blade terminal, and check that the wires come out for about 0 to 0.5 mm from a
sleeve.
Check the condition of the blade terminal after crimping. Do not use a blade terminal of which
the crimping is inappropriate, or the face is damaged.
Blade terminals commercially available (as of January 2015)
A blade terminal with an insulation sleeve compatible with the MTW wire which has a thick wire
insulation.
Applicable for the terminal A1, B1, C1, A2, B2, C2.
Insert the wires into a socket
I002396E
Fig. 2-28: Crimped wire end sleeves
Cable gauge (mm
2
)
Blade terminal model
Crimping tool
With insulation sleeve Without insulation sleeve For UL wire
0.3 AI 0,5-10WH
⎯ ⎯
CRIMPFOX 6
0.5 AI 0,5-10WH
⎯
AI 0,5-10WH-GB
0.75 AI 0,75-10GY A 0,75-10 AI 0,75-10GY-GB
1 AI 1-10RD A 1-10 AI 1-10RD/1000GB
1.25, 1.5 AI 1,5-10BK A 1,5-10
AI 1,5-10BK/1000GB
0.75 (for two wires) AI-TWIN 2 × 0,75-10GY
⎯ ⎯
Tab. 2-17: Phoenix Contact Co., Ltd.
Cable gauge (mm
2
)
Blade terminal product number Insulation product number
Crimping tool
product number
0.3 to 0.75 BT 0.75-11 VC 0.75 NH 69
Tab. 2-18: NICHIFU Co.,Ltd
Fig. 2-29:
Cable connection
I002398E
10 mm
0–
0.5
mm
Damaged Crumpled
tip
Unstrand-
ed wires
Wires are not
inserted into the
sleeve.
Sleeve
Wire