Mitsubishi Electric FR-A800, Instruction Manual

Page: 394 / 1042

(E) Environment setting parameters Parameters
5 - 214
GOT initial setting (PU connector) (Pr. 999 = "10, 12")
When Pr. 414 = "1", the setting value is not changed.
●
Initial setting with the GOT2000 series
– When "FREQROL 500/700/800, SENSORLESS SERVO" is selected for "Controller Type" in the GOT
setting, set Pr. 999 = "10" to configure the GOT initial setting.
– When "FREQROL 800(Automatic Negotiation)" is selected for "Controller Type" in the GOT
setting, the GOT automatic connection can be used. When "FREQROL 800(Automatic Negoti-
ation)" is selected for "Controller Type" in the GOT setting and the GOT automatic connection
is not used, set Pr. 999="12" to configure the GOT initial setting. (Refer to page 5-649 .)
●
Initial setting with the GOT1000 series
– Set Pr. 999 = "10" to configure the GOT initial setting.
Pr. Name
Initial
value
Pr. 999 = "10" Pr. 999 = "12" Refer to page
79 Operation mode selection 0 1 1 5-263
118 PU communication speed 192 192 1152
5-610
119 PU communication stop bit length 1 10 0
120 PU communication parity check 2 1 1
121 Number of PU communication retries 1 9999 9999
122 PU communication check time interval 9999 9999 9999
123 PU communication waiting time setting 9999 0 ms 0 ms
124 PU communication CR/LF selection 1 1 1
340 Communication startup mode selection 0 0 0 5-272
414 PLC function operation selection 0 —
2
5-587
Tab. 5-83: GOT initial setting (PU connector)
NOTES Always perform an inverter reset after the initial setting.
For the details of connection with GOT, refer to the Instruction Manual of GOT.