Mitsubishi Electric FR-A800, Instruction Manual

Page: 512 / 1042

(M) Monitor display and monitor output signal Parameters
5 - 332
When using the item as the main monitor data on the LCD operation panel (FR-LU08) or the
parameter unit (FR-PU07), use Pr. 774 to Pr. 776 or the monitor function of the FR-LU08 or the
FR-PU07 for setting.
The cumulative energization time and actual operation time are accumulated from 0 to 65535
hours, then cleared, and accumulated again from 0.
The actual operation time does not increase if the cumulative running time before power OFF is
less than an hour.
#
When using the parameter unit (FR-PU07), "kW" is displayed.
,
Differs according to capacities. (FR-A820-03160(55K) or lower, FR-A840-01800(55K) or lower /
FR-A820-03800(75K) or higher, FR-A840-02160(75K) or higher)
Cumulative
pulse overflow
times (control
terminal option)
'
— 74 H4A 40274

1
The number of the cumulative
pulse carrying-over times is
displayed (for FRA8TP)
32-bit cumula-
tive power
(lower 16 bits)
1 kWh × H4D 40277
Displays the 32-bit cumulative
power value in multiplies of 16
bits.
Monitoring can be performed via
RS-485 communication and
communication options. (To find
the monitor codes for each
communication option, refer to
the Instruction Manual of each
communication option.)
32-bit cumula-
tive power
(upper 16 bits)
1 kWh × H4E 40278
32-bit cumula-
tive power
(lower 16 bits)
0.01 kWh/
0.1 kWh
,
× H4F 40279
32-bit cumula-
tive power
(upper 16 bits)
0.01 kWh/
0.1 kWh
,
× H50 40280
Remote output
value 1
0.1% 87 H57 40287

Displays the setting values of
Pr. 656 to Pr. 659 (analog remote
output).
(Refer to page 5-382.)
Remote output
value 2
0.1% 88 H58 40288
Remote output
value 3
0.1% 89 H59 40289
Remote output
value 4
0.1% 90 H5A 40290
PID manipulated
variable
0.1% 91 H5B 40291

Displays the PID control
manipulated amount.
(Refer to page 5-537)
Second PID set
point
0.1% 92 H5C 40292
Displays the set point, measured
value, and deviation under
second PID control.
(Refer to page 5-537)
Second PID
measured value
0.1% 93 H5D 40293
Second PID
deviation
0.1% 94 H5E 40294

Second PID
measured value
2
0.1% 95 H5F 40295
Displays PID measured value
even if PID control operating
conditions are not satisfied while
the second PID control is
enabled (Pr.753 ≠ "0").
(Refer to page 5-537)
Second PID
manipulated
variable
0.1% 96 H60 40296

Displays the second PID control
manipulated amount.
(Refer to page 5-537)
Dancer main
speed setting
0.01 Hz 97 H61 40297
Displays the main speed setting
under step control.
Control circuit
temperature
1 °C 98 H62 40298

Displays the temperature of the
control circuit board.
Without minus sign: 0 to 100 °C
With minus sign: –20 to 100 °C
Types of
monitor
Unit
Pr. 52,
Pr. 774 to Pr. 776,
Pr. 992
RS-485
communica-
tion dedicat-
ed monitor
(hexadeci-
mal)
MODBUS
RTU real
time
monitor
Minus (-)
display
Description
Tab. 5-126: Monitor description list (5)