Dell Networking S6000 System, Reference Manual

Page: 342 / 1510

Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In
Receiver Only mode, BGP saves the advertised routes of peers that support this
capability when they restart.
BGP graceful restart is active only when the neighbor becomes established.
Otherwise it is disabled. Graceful-restart applies to all neighbors with established
adjacency.
This command automatically restarts the BGP instance for the configuration to
take effect.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
S6000
Syntax
bgp non-deterministic-med
To return to the default, use the
no bgp non-deterministic-med
command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do
not have their MEDs compared).
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
In Non-Deterministic mode, paths are compared in the order in which they arrive.
This method can lead to Dell Networking OS choosing different best paths from a
set of paths, depending on the order in which they are received from the neighbors
because MED may or may not get compared between adjacent paths. In
Deterministic mode (
no bgp non-deterministic-med
), Dell Networking OS
342
Border Gateway Protocol