Dell Networking S6000 System, Reference Manual

Page: 992 / 1510

Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
ip ospf network
Set the network type for the interface.
S6000
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, use the
no ip ospf network
command.
Parameters
broadcast Enter the keyword
broadcast
to designate the interface as
part of a broadcast network.
point-to-point Enter the keywords
point-to-point
to designate the
interface as part of a point-to-point network.
Defaults Broadcast.
Command
Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
992
Open Shortest Path First (OSPFv2 and OSPFv3)