Dell Networking S6000 System, Reference Manual

Page: 1192 / 1510

Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Introduced on the E-Series.
rmon collection statistics
Enable RMON MIB statistics collection on an interface.
S6000
Syntax
rmon collection statistics {controlEntry integer } [owner name ]
To remove RMON MIB statistics collection on an interface, use the
no rmon
collection statistics {controlEntry integer }
command.
Parameters
controlEntry
integer
Enter the keyword
controlEntry
to specify the RMON
group of statistics using a value. Then enter an integer value
from 1 to 65535 that identifies the RMON Statistic Table. The
integer value must be a unique in the RMON statistic table.
owner name (OPTIONAL) Enter the keyword
owner
then the owner name
to record the owner of the RMON group of statistics.
Defaults none
Command
Modes CONFIGURATION INTERFACE (config-if)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
1192
Remote Monitoring (RMON)