Dell Networking S6000 System, Reference Manual, Page: 870 / 1510

mac learning-limit station-move-violation
Specify the actions for a station move violation.
S6000
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the
no mac learning-limit station-move-
violation
command, then the configured keyword.
Parameters
log Enter the keyword
log
to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword
shutdown
to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending Enter the keywords
shutdown-offending
to shut down
the offending interface and generate a syslog message.
shutdown-
original Enter the keywords
shutdown-original
to shut down the
original interface and generate a syslog message.
Defaults none
Command
Modes INTERFACE (conf-if-interface-slot/port)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the S-Series.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced on the E-Series.
Usage
Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands show mac learning-limit — displays details of the mac learning-limit.
870
Layer 2