Dell Networking S6000 System, Reference Manual, Page: 1232 / 1510

aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
S6000
Syntax
aaa authentication enable {default | method-list-name } method
[ ... method2 ]
To return to the default setting, use the
no aaa authentication enable
{default | method-list-name } method [ ... method2 ]
command.
Parameters
default Enter the keyword
default
then the authentication
methods to use as the default sequence of methods for the
Enable login. The default is
default enable
.
method-list-
name Enter a text string (up to 16 characters long) to name the list
of enabled authentication methods activated at login.
method Enter one of the following methods:
•
enable
: use the password the
enable password
command defines in CONFIGURATION mode.
•
line
: use the password the
password
command defines
in LINE mode.
•
none
: no authentication.
•
radius
: use the RADIUS servers configured with the
radius-server host
command.
• : use the server(s) configured with the
tacacs-server host
command.
... method2 (OPTIONAL) In the event of a “no response” from the first
method, Dell Networking OS applies the next configured
method.
Defaults Use the
enable
password.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
1232
Security