Defaults
The IP address assigned to the management interface is the default.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version 9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
E-Series legacy
command
Usage
Information
To enable this
snmp-server trap-source
command, configure an IP address
on the interface and enable the interface configured as an SNMP trap source.
Related
Commands
snmp-server user
Configure a new user to an SNMP group.
S6000
Syntax
snmp-server user
name
{
group_name
remote
ip-address
vrf
vrf-
name
udp-port
port-number
} [1 | 2c | 3] [encrypted] [auth {md5
| sha}
auth-password
] [priv des56
priv password
] [access
access-list-name
| ipv6
access-list-name
|
access-list-name
ipv6
access-list-name
]
To remove a user from the SNMP group, use the
no snmp-server user
name
{
group_name
remote
ip-address
vrf
vrf-name
udp-port
port-
number
} [1 | 2c | 3] [encrypted] [auth {md5 | sha}
auth-
password
] [priv des56
priv password
] [access
access-list-name
|
ipv6
access-list-name
|
access-list-name
ipv6
access-list-name
]
command.
Simple Network Management Protocol (SNMP) and Syslog
1351
Summary of Contents for Networking S6000 System
