Dell Networking S6000 System, Reference Manual

Page: 584 / 1510

interface
Configure the primary, secondary, and control-vlan interfaces.
S6000
Syntax
interface {primary interface secondary interface control-vlan
vlan-id }
To return to the default, use the
no interface {primary interface
secondary interface control-vlan vlan-id}
command.
Parameters
primary
interface
Enter the keyword
primary
to configure the primary
interface then one of the following interfaces and slot/port
information:
•
Fast Ethernet interface
: enter the keyword
FastEthernet
then the slot/port information.
•
Port Channel interface
: enter the keyword
port-
channel
then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface
: enter the keyword
TenGigabitEthernet
then the slot/port information
•
40-Gigabit Ethernet interface
: enter the keyword
fortyGigE
then the slot/port information
secondary
interface
Enter the keyword
secondary
to configure the secondary
interface then one of the following interfaces and slot/port
information:
•
Fast Ethernet interface
: enter the keyword
FastEthernet
then the slot/port information.
•
Port Channel interface
: enter the keyword
port-
channel
then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface
: enter the keyword
TenGigabitEthernet
then the slot/port information
•
40-Gigabit Ethernet interface
: enter the keyword
fortyGigE
then the slot/port information
control-vlan
vlan-id
Enter the keyword
control-vlan
then the VLAN ID. The
range is from 1 to 4094.
Defaults none
Command
Modes CONFIGURATION (conf-frrp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
584
Force10 Resilient Ring Protocol (FRRP)