Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
Version 6.1.1.0
Added support for RADIUS.
aaa authorization config-commands
Set parameters that restrict (or permit) a user’s access to EXEC level commands.
S6000
Syntax
aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the
no
aaa authorization config-commands
command.
Defaults
Enabled when you configure
aaa authorization commands
command.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the E-Series.
Usage
Information
By default, the
aaa authorization commands
command configures the system
to check both EXEC level and CONFIGURATION level commands. Use the
command
no aaa authorization config-commands
to enable only EXEC-
level command checking.
1228
Security
Summary of Contents for Networking S6000 System
