Dell Networking S6000 System, Reference Manual

Page: 1371 / 1510

logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as the
logging buffer, Syslog server, or terminal lines.
S6000
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the
no
logging on
command.
Defaults Enabled.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information When you use the
no logging on
command, messages are logged only to the
console.
Related
Commands
logging — enables logging to the Syslog server.
logging buffered — sets the logging buffered parameters.
logging console — sets the logging console parameters.
logging monitor — sets the logging parameters for the terminal connections.
Simple Network Management Protocol (SNMP) and Syslog
1371