Dell Networking S6000 System, Reference Manual, Page: 164 / 1510

dot1x tx-period
Configure the intervals at which EAPOL PDUs the Authenticator PAE transmits.
S6000
Syntax
dot1x tx-period seconds
To return to the default, use the
no dot1x tx-period
command.
Parameters
seconds Enter the interval time, in seconds, that EAPOL PDUs are
transmitted. The range is from 1 to 65535. The default is
30 .
Defaults 30 seconds
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series.
show dot1x cos-mapping interface
Display the CoS priority-mapping table the RADIUS server provides and applies to authenticated
supplicants on an 802.1X-enabled system.
S6000
Syntax
show dot1x cos-mapping interface interface [mac-address mac-
address ]
Parameters
interface Enter one of the following keywords and slot/port or number
information:
164
802.1X