Dell Networking S6000 System, Reference Manual

Page: 1229 / 1510

aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
S6000
Syntax
aaa authorization exec { name | default} {local || ||
if-authenticated || none}
To disable authorization checking for EXEC level commands, use the
no aaa
authorization exec
command.
Parameters
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform
authorization.
Use the protocol to perform authorization.
none Enter the keyword
none
to apply no authorization.
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Added support for RADIUS.
privilege level (CONFIGURATION mode)
Change the access or privilege level of one or more commands.
S6000
Syntax
privilege mode {level level command | reset command }
Security
1229