Dell Networking S6000 System, Reference Manual, Page: 881 / 1510

• IP address
id vlan-id (OPTIONAL) Enter the keyword
id
then a number from 1 to
4094. Only information on the VLAN specified is displayed.
name vlan-
name
(OPTIONAL) Enter the keyword
name
then the name
configured for the VLAN. Only information on the VLAN
named is displayed.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.1.
(0.0) Updated to support OpenFlow.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Augmented to display PVLAN data for the C-Series and S-
Series and revised the output to include the Description field
to display a user-entered VLAN description.
Version 7.6.1.0 Introduced on the S-Series and revised the output to display
Native VLAN.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information The following describes the
show vlan
command shown in the following
example.
Column Heading Description
(Column 1 — no
heading)
• asterisk symbol (*) = Default VLAN
• G = GVRP VLAN
• P = primary VLAN
• C = community VLAN
• I = isolated VLAN
• O = OpenFlow
Layer 2
881