Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.2.1.0
Introduced on the C-Series and S-Series.
lease
Specify a lease time for the addresses in a pool.
S6000
Syntax
lease {
days
[
hours
] [
minutes
] | infinite}
Parameters
days
Enter the number of days of the lease. The range is from 0 to
31.
hours
Enter the number of hours of the lease. The range is from 0
to 23.
minutes
Enter the number of minutes of the lease. The range is from
0 to 59.
infinite
Specify that the lease never expires.
Defaults
24 hours
Command
Modes
DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.2.1.0
Introduced on the C-Series and S-Series.
532
Dynamic Host Configuration Protocol (DHCP)
Summary of Contents for Networking S6000 System
