redistribute bgp
Redistribute routing information from a BGP process.
S6000
Syntax
redistribute bgp
AS number
[level-1| level-1-2 | level-2]
[metric
metric-value
] [metric-type {external| internal}]
[route-map
map-name
]
To return to the default values, use the
no redistribute bgp
command with
the appropriate parameters.
Parameters
AS number
Enter a number that corresponds to the autonomous system
number. The range is from 1 to 65355.
level-1
(OPTIONAL) Routes are independently redistributed into IS-
IS Level 1 routes only.
level-1-2
(OPTIONAL) Routes are independently redistributed into IS-
IS Level 1 and Level 2 routes.
level-2
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level 2 routes only. This setting is the default.
metric
metric-
value
(OPTIONAL) The value used for the redistributed route. Use a
metric value that is consistent with the destination protocol.
The range is from 0 to 16777215. The default is
0
.
metric-type
{external|
internal}
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. The two
options are:
•
external
•
internal
route-map
map-name
map-name
is an identifier for a configured route map. The
route map filters imported routes from the source routing
protocol to the current routing protocol.
If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
Defaults
IS-IS Level 2
routes only
Command
Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
838
Intermediate System to Intermediate System (IS-IS)
Summary of Contents for Networking S6000 System
