Dell Networking S6000 System, Reference Manual, Page: 1221 / 1510

Parameters
system Enter the keyword
system
to send accounting information
of any other AAA configuration.
exec Enter the keyword
exec
to send accounting information
when a user has logged in to EXEC mode.
commands
{
level | role
role-name
Enter the keyword
command
then a privilege level for
accounting of commands executed at that privilege level or
enter the keyword
role
then the role name for accounting
of commands executed by a user with that user role.
name | default Enter one of the following:
• For
name
, enter a user-defined name of a list of
accounting methods.
• For
default
, the default accounting methods used.
start-stop Enter the keywords
start-stop
to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords
wait-start
to ensure that the TACACS
+ security server acknowledges the start notice before
granting the user’s process request.
stop-only Enter the keywords
stop-only
to instruct the
security server to send a “stop record accounting” notice at
the end of the requested user process.
Enter the keyword to use data for
accounting. The Dell Networking OS currently only supports
accounting.
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0) Added support for roles on the Z9000, S6000, S4820T,
S4810, and MXL
Version 9.2(1.0) Introduced on the Z9500.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Security
1221