Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.2.1.0
Introduced on S-Series Stacking.
Version 8.1.1.0
Introduced on the E-Series ExaScale.
Version 7.7.1.0
Introduced on the S-Series.
Version 7.6.1.0
Introduced on the C-Series.
Version 7.4.1.0
Introduced on the E-Series.
Usage
Information
This command sets the counter polling interval for an interface.
Related
Commands
sflow polling-interval (Global)
— globally sets the polling interval.
sflow sample-rate (Global)
Change the global default sampling rate.
S6000
Syntax
sflow sample-rate
value
To return to the default sampling rate, use the
no sflow sample-rate
command.
Parameters
value
Enter the sampling rate value. For the C-Series and S-Series,
the range is from 256 to 8388608 packets Enter values in
powers of 2 only; for example, 4096, 8192, 16384, and so
on. The default is
32768 packets
.
Defaults
32768 packets
sFlow
1327
Summary of Contents for Networking S6000 System
