Dell Networking S6000 System, Reference Manual, Page: 945 / 1510

name
The name you assign to the multiple spanning tree region.
S6000
Syntax
name region-name
To remove the region name, use the
no name
command.
Parameters
region-name Enter the MST region name. The range is 32 character limit.
Defaults no default name.
Command
Modes MULTIPLE SPANNING TREE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced.
Usage
Information For two MSTP switches to be within the same MSTP region, the switches must
share the same region name (including matching case).
Related
Commands
msti — maps the VLAN(s) to an MST instance.
revision — assigns the revision number to the MST configuration.
Multiple Spanning Tree Protocol (MSTP)
945