Dell Networking S6000 System, Reference Manual, Page: 947 / 1510

revision
The revision number for the multiple spanning tree configuration.
S6000
Syntax
revision range
To return to the default values, use the
no revision
command.
Parameters
range Enter the revision number for the MST configuration. The
range is from 0 to 65535. The default is
0 .
Defaults 0
Command
Modes MULTIPLE SPANNING TREE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information For two MSTP switches to be within the same MST region, the switches must share
the same revision number.
Related
Commands
msti — maps the VLAN(s) to an MST instance.
name — assigns the region name to the MST region.
Multiple Spanning Tree Protocol (MSTP)
947