Dell Networking S6000 System Reference Manual Download Page 62

Page: 62 / 1510

Related
Commands

•

copy

— copy one file to another location.

•

show file-systems

— Display information about the file systems on the system.

rename

Rename a file in the local file system.

S6000

Syntax

rename

url url

Parameters

url

Enter the following keywords and a filename:

• For a file on the internal Flash, enter

flash://

followed

by the filename.

• For a file on an external USB drive, enter

usbflash://

followed by the filename.

Command
Modes

EXEC Privilege

Command
History

This guide is platform-specific. For command information about other platforms,
refer to the relevant

Dell Networking OS Command Line Reference Guide

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.6.1.0

Introduced on S-Series

Version 7.5.1.0

Introduced on C-Series

E-Series

Original command

File Management

Summary of Contents for Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Networking S6000 System

Reviews:

Dell Networking S6000 System, Reference Manual, Page: 62 / 1510

Search results

Summary of Contents for Networking S6000 System

Reviews: