•
dscp
— Enter the keyword
dcsp
followed by the DCSP
value to match to the IP DCSCP values. The range is from
0 to 63.
•
fragments
— Enter the keyword
fragments
to use
ACLs to control packet fragments.
•
order
— Enter the keyword
order
to specify the QoS
order of priority for the ACL entry. The range is from 0 to
254 (0 is the highest priority and 254 is the lowest; lower-
order numbers have a higher priority). The default is, if
you do not use the keyword
order
, the ACLs have the
lowest order by default (255).
host
ip-address
Enter the keyword
host
and then enter the IP address to
specify a host IP address only.
Defaults
Not configured.
Command
Modes
CONFIGURATION-STANDARD-ACCESS-LIST
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.3.1.0
Add the DSCP value for ACL matching.
Version 8.2.1.0
Allows ACL control of fragmented packets for IP (Layer 3)
ACLs.
Version 8.1.1.0
Introduced on the E-Series ExaScale.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
Version 7.4.1.0
Added support for the non-contiguous mask and added the
monitor
option.
Version 6.5.1.0
Expanded to include the optional QoS
order
priority for the
ACL entry.
Usage
Information
The
order
option is relevant in the context of the Policy QoS feature only. For
more information, refer to the Quality of Service chapter of the
Dell Networking OS
Configuration Guide
.
The software cannot count both packets and bytes, so when you enter the count
byte options, only bytes are incremented.
178
Access Control Lists (ACL)
Summary of Contents for Networking S6000 System
