
The Lines
Beginning with:
Description
BGP neighbor
Displays the BGP neighbor address and its AS number. The
last phrase in the line indicates whether the link between the
BGP router and its neighbor is an external or internal one. If
they are located in the same AS, the link is internal;
otherwise the link is external.
BGP version
Displays the BGP version (always version 4) and the remote
router ID.
BGP state
Displays the neighbor’s BGP state and the amount of time in
hours:minutes:seconds it has been in that state.
Last read
This line displays the following information:
• last read is the time (hours:minutes:seconds) the router
read a message from its neighbor
• hold time is the number of seconds configured between
messages from its neighbor
• keepalive interval is the number of seconds between
keepalive messages to help ensure that the TCP session
is still alive.
Received
messages
This line displays the number of BGP messages received, the
number of notifications (error messages), and the number of
messages waiting in a queue for processing.
Sent messages
The line displays the number of BGP messages sent, the
number of notifications (error messages), and the number of
messages waiting in a queue for processing.
Received updates
This line displays the number of BGP updates received and
sent.
Soft
reconfiguration
This line indicates that soft reconfiguration inbound is
configured.
Minimum time
Displays the minimum time, in seconds, between
advertisements.
(list of inbound
and outbound
policies)
Displays the policy commands configured and the names of
the Route map, AS-PATH ACL, or Prefix list configured for
the policy.
For address
family:
Displays the IPv4 Unicast as the address family.
BGP table version
Displays which version of the primary BGP routing table the
router and the neighbor are using.
accepted prefixes
Displays the number of network prefixes the router accepts
and the amount of memory used to process those prefixes.
Border Gateway Protocol
417
Summary of Contents for Networking S6000 System
