manualshive.com logo in svg

Dell Networking S6000 System, Reference Manual, Page: 149 / 1510

Share
Download
Dell Networking S6000 System Reference Manual Download Page 149

debug dot1x

Display 802.1X debugging information.

S6000

Syntax

debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu] 
[interface 

interface

]

Parameters

all

Enable all 802.1X debug messages.

auth-pae-fsm

Enable authentication PAE FSM debug messages.

backend-fsm

Enable backend FSM debug messages.

eapol-pdu

Enable the EAPOL frame trace and related debug messages.

interface 

interface

Restricts the debugging information to an interface.

Defaults

Disabled

Command 
Modes

EXEC Privilege

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 9.0.0.0

Introduced on the Z9000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 
8.3.12.0

Introduced on the S4810.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.4.1.0

Introduced on the C-Series and S-Series.

dot1x auth-fail-vlan

Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.

S6000

Syntax

dot1x auth-fail-vlan 

vlan-id

 [max-attempts 

number

]

802.1X

149

Summary of Contents for Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments