Dell Networking S6000 System, Reference Manual, Page: 1293 / 1510

Version 9.5(0.0) Introduced the
cipher
,
kex
and
mac
options on the Z9000,
S6000, S4820T, S4810, and MXL.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information This command enables the SSH server and begins listening on a port. If a port is
not specified, listening is on SSH default port 22.
NOTE: Starting with Dell Networking OS Release 9.2(0.0), SSH server is
enabled by default.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Related
Commands show ip ssh — displays the ssh information.
ip ssh server vrf
Configure an SSH server on either a specific VRF or a management VRF.
Syntax
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
ip ssh server vrf {management | vrf-name }
To disable the SSH server configuration, use the
no ip ssh server vrf
{management | vrf-name}
command.
Parameters
vrf
management Enter the key word
vrf
followed by the keyword
management
to configure an SSH server on a management
VRF.
vrf vrf-name Enter the key word
vrf
followed by the VRF name to
configure an SSH server on that VRF.
Security
1293