ip msdp cache-rejected-sa
Enable an MSDP cache for the rejected source-active entries.
S6000
Syntax
ip msdp cache-rejected-sa {
number
}
To clear the MSDP rejected source-active entries, use the
no ip msdp cache-
rejected-sa {
number
}
command then the
ip msdp cache-rejected-sa
{
number
}
command.
Parameters
number
Enter the number of rejected SA entries to cache. The range
is from 0 to 32766.
Defaults
none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.4.1.0
Introduced
Related
Commands
show ip msdp sa-cache rejected-sa
ip msdp default-peer
Define a default peer from which to accept all source-active (SA) messages.
S6000
Syntax
ip msdp default-peer
peer address
[list
name
]
To remove the default peer, use the
no ip msdp default-peer {
peer
address
} list
name
command.
Multicast Source Discovery Protocol (MSDP)
927
Summary of Contents for Networking S6000 System
