manualshive.com logo in svg

Dell Networking S6000 System, Reference Manual, Page: 1185 / 1510

Share
Download
Dell Networking S6000 System Reference Manual Download Page 1185

Example

Dell#show ip rip database

Total number of routes in RIP database: 1624

204.250.54.0/24

      [50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15

204.250.54.0/24     auto-summary

203.250.49.0/24

      [50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14

203.250.49.0/24     auto-summary

210.250.40.0/24

      [50/2] via 1.1.18.2, 00:00:14, Vlan 18

      [50/2] via 1.1.130.2, 00:00:12, Port-channel 30

210.250.40.0/24     auto-summary

207.250.53.0/24

      [50/2] via 1.1.120.2, 00:00:55, Port-channel 20

      [50/2] via 1.1.130.2, 00:00:12, Port-channel 30

      [50/2] via 1.1.10.2, 00:00:18, Vlan 10

207.250.53.0/24     auto-summary

208.250.42.0/24

      [50/2] via 1.1.120.2, 00:00:55, Port-channel 20

      [50/2] via 1.1.130.2, 00:00:12, Port-channel 30

      [50/2] via 1.1.10.2, 00:00:18, Vlan 10

208.250.42.0/24     auto-summary

show running-config rip

Display the current RIP configuration.

S6000

Syntax

show running-config rip

Defaults

none

Command 
Modes

EXEC Privilege

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.8.1.0

Introduced on the S-Series.

Version 7.7.1.0

Introduced on the C-Series.

Version 7.6.1.0

Introduced on the E-Series.

Routing Information Protocol (RIP)

1185

Summary of Contents for Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments