ping
Test connectivity between the system and another device by sending echo requests and waiting for
replies.
S6000
Syntax
ping [
host
|
ip-address
|
ipv6-address
] [count {
number
|
continuous}] [
datagram-size
] [
timeout
] [
source (ip src-ipv4-
address)
|
interface
] [
tos
] [
df-bit (y
|
n)
] [
validate-reply(y
|
n)
] [
outgoing-interface
] [
pattern pattern
] [
sweep-min-size
]
[
sweep-max-size
] [
sweep-interval
] [
ointerface (ip src-ipv4-
address)
|
interface
]
Parameters
host
(OPTIONAL) Enter the host name of the devices to which
you are testing connectivity.
ip-address
(OPTIONAL) Enter the IPv4 address of the device to which
you are testing connectivity. The address must be in the
dotted decimal format.
ipv6-address
(OPTIONAL) Enter the IPv6 address, in the x:x:x:x::x format,
to which you are testing connectivity.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
count
Enter the number of echo packets to be sent. The default is
5
.
• number: from 1 to 2147483647
• continuous: transmit echo request continuously
datagram size
Enter the ICMP datagram size. The range is from 36 to 15360
bytes. The default is
100
.
timeout
Enter the interval to wait for an echo reply before timing out.
The range is from 0 to 3600 seconds. The default is
2
seconds
.
source
Enter the IPv4 or IPv6 source ip address or the source
interface. For IPv6 addresses, you may enter global
addresses only. Enter the IP address in A.B.C.D format.
• For a Port Channel interface, enter the keyword
port-
channel
then a number: The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Tunnel interface, enter the keyword
tunnel
then a
number from 1 to 16383.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
106
Control and Monitoring
Summary of Contents for Networking S6000 System
