Command
Modes
VLT DOMAIN PROXY GW STATIC
Command
History
Version 9.4(0.0)
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
You can configure the remote MAC address of the VLT peer to be associated with
the static VLT proxy gateway and exclude a VLAN or a range of VLANs from proxy
routing. This parameter is for a static VLT proxy gateway configuration.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
peer-domain-link port-channel exclude-vlan
Configure proxy-gateway LLDP, specify a port-channel and a VLAN or range of VLANs, and exclude a
VLAN or a range of VLANs from proxy routing.
S6000
Syntax
[no] peer-domain-link port-channel
interface-identifier
exclude-vlan
vlan-range
Parameters
port-channel
Configure the proxy-gateway interface port-channel. Port
channel range is from 1 to 128.
vlan-range
Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command
Modes
VLT DOMAIN PROXY GW LLDP
Command
History
Version 9.4(0.0)
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
You can configure the port channel interface that must be associated with the
LLDP proxy gateway and exclude a VLAN or a range of VLANs from proxy routing.
This parameter is for an LLDP proxy gateway configuration.
1456
VLT Proxy Gateway
Summary of Contents for Networking S6000 System
