Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.1.1.0
Introduced on the E-Series ExaScale.
Version 7.7.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
pre-7.7.1.0
Introduced on the E-Series.
Related
Commands
— enables a monitoring session.
monitor session
Create a session for monitoring traffic with port monitoring.
S6000
Syntax
monitor session
session-ID
(type { rpm | erpm })
To delete a session, use the
no monitor session
session-ID
command.
To delete all monitor sessions, use the
no monitor session all
command.
Parameters
session-ID
Enter a session identification number. The range is from 0 to
65535.
type rpm |
erpm
Specifies one of the following type:
•
rpm
: to create remote port monitoring session.
•
erpm
: to create encapsulated remote port monitoring
session.
Defaults
none
Port Monitoring
1077
Summary of Contents for Networking S6000 System
