Dell Networking S6000 System, Reference Manual, Page: 745 / 1510

ip ip-address
mask
(OPTIONAL) Enter the keyword
ip
then an IP address in the
dotted decimal format. Enter the optional IP address mask in
the slash prefix format (/ x).
inspection Enter the keyword
inspection
with one of the following
keywords to view ARP entries:
•
database
— view a list of ARP entries learned using DAI
•
statistics
— view DAI statistics
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword
macaddress
then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword
static
to view entries
entered manually.
retries (OPTIONAL) Enter the keyword
retries
to show the
number of ARP retries before a 20–second back off.
dynamic (OPTIONAL) Enter the keyword
dynamic
to view dynamic
entries.
summary (OPTIONAL) Enter the keyword
summary
to view a summary
of ARP entries.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Added support for VRF and added usage information for the
clear arp-cache
command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added support for 4094 VLANs on the E-Series ExaScale (the
prior limit was 2094).
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.9.1.0 Introduced VRF on the E-Series.
Version 7.8.1.0 Augmented to display local ARP entries learned from private
VLANs (PVLANs).
IPv4 Routing
745