Dell Networking S6000 System, Reference Manual

Page: 75 / 1510

Dell(conf-if-te-0/5)#
Dell#
Example
(S6000)
Dell#S6000#show version
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9-4(0-119)
Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.
Build Time: Tue Mar 18 10:32:02 PDT 2014
Build Path: /work.local/build/buildSpaces/build01/E9-4-0/SW/
SRCC
Dell Networking OS uptime is 1 day(s), 0 hour(s), 19 minute(s)
System image file is "DT-MAA-S6000-16-PI"
System Type: S6000
Control Processor: Intel Centerton with 3203911680 bytes of
memory, core(s) 2.
16G bytes of boot flash memory.
1 32-port TE/FG (SI)
32 Forty GigabitEthernet/IEEE 802.3 interface(s)
upgrade system
Upgrade the system image.
S6000
Syntax upgrade system {flash: | ftp: | scp: | tftp: | usbflash: |
stack-unit {0-5 | all} {A: | B:}
Parameters
0–5 Enter the keywords
0–5
to upgrade only the mentioned
stack-unit.
all Enter the keyword
all
to upgrade all the member units of
the stack.
ftp Enter the keyword
ftp
to follow it with the location of the
source file in this form: //userid:password@hostip/filepath ,
or press Enter to launch a prompt sequence.
scp Enter the keyword
scp
to follow it with the location of the
source file in this form: //userid:password@hostip/filepath ,
or press Enter to launch a prompt sequence.
tftp Enter the keyword
tftp
to follow it with the location of the
source file in this form: //hostlocation/filepath , or press
Enter to launch a prompt sequence.
flash Enter the keyword
flash
to follow it with the location of the
source file in this form: //filepath , or press Enter to launch a
prompt sequence.
usbflash Enter the keyword
flash
to follow it with the location of the
source file in this form: //filepath , or press Enter to launch a
prompt sequence.
File Management
75