Dell Networking S6000 System, Reference Manual, Page: 305 / 1510

Related
Commands
neighbor bfd disable — Explicitly disables a BFD session with a BGP neighbor or a
BGP peer group.
ip route bfd
Enable BFD for all neighbors configured through static routes.
S6000
Syntax
ip route bfd [interval interval min_rx min_rx multiplier value
role {active | passive}]
To disable BFD for all neighbors configured through static routes, use the
no ip
route bfd [interval interval min_rx min_rx multiplier value
role {active | passive}]
command.
Parameters
interval
milliseconds
(OPTIONAL) Enter the keywords
interval
to specify non-
default BFD session parameters beginning with the
transmission interval. The range is from 50 to 1000. The
default is
100 .
min_rx
milliseconds
Enter the keywords
min_rx
to specify the minimum rate at
which the local system receives control packets from the
remote system. The range is from 50 to 1000. The default is
100 .
multiplier value Enter the keywords
multiplier
to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is
3 .
role [active |
passive] Enter the role that the local system assumes:
•
Active
— The active system initiates the BFD session.
Both systems can be active for the same session.
•
Passive
— The passive system does not initiate a
session. It only responds to a request for session
initialization from the active system.
The default is Active .
Defaults See Parameters
Command
Modes CONFIGURATION
Command
History
Version 9.3.
(0.0) Introduced on S6000.
Bidirectional Forwarding Detection (BFD)
305