Dell Networking S6000 System, Reference Manual

Page: 1236 / 1510

Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Related
Commands
line — applies an authentication method list to the designated terminal lines.
ip access-list standard — names (or selects) a standard access list to filter based on
the IP address.
ip access-list extended — names (or selects) an extended access list based on the
IP addresses or protocols.
enable password
Change the password for the
enable
command.
S6000
Syntax
enable password [level level ] [ encryption-type ] password
To delete a password, use the
no enable password [ encryption-type ]
password [level level ]
command.
Parameters
level level (OPTIONAL) Enter the keyword
level
then a number as the
level of access. The range is from 1 to 15.
encryption-
type
(OPTIONAL) Enter the number
7
or
0
as the encryption type.
Enter a
7
then a text string as the hidden password. The text
string must be a password that was already encrypted by a
Dell Networking router.
Use this parameter only with a password that you copied
from the
show running-config
file of another Dell
Networking router.
password Enter a text string, up to 32 characters long, as the clear text
password.
Defaults No password is configured. level = 15 .
1236
Security