Dell Networking S6000 System, Reference Manual

Page: 630 / 1510

• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigE
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a tunnel interface, enter the keyword
tunnel
. The
range is from 1 to 16383.
vrrp [[ipv6] vrid ] (OPTIONAL) Enter the keyword
vrrp
to clear the counters of
all VRRP groups. To clear the counters of VRRP groups on all
IPv6 interfaces, enter
ipv6
. To clear the counters of a
specified group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords
learning-limit
to clear
unknown source address (SA) drop counters when MAC
learning limit is configured on the interface.
Defaults Without an interface specified, the command clears all interface counters.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF
instance.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added support for 4093 VLANs on the E-Series ExaScale.
Prior to the release, 2094 was supported.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Updated the definition of the
learning-limit
option for
clarity.
Example
Dell#clear counters
Clear counters on all interfaces [confirm]
630
Interfaces