Dell Networking S6000 System, Reference Manual, Page: 1376 / 1510

Example
Dell(conf)#
logging version
?
<0-1> Select syslog version (default = 0)
Dell(conf)#
logging version 1
show logging auditlog
Displays an audit log.
Syntax show logging auditlog
Defaults none
Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Example
Dell(conf)#show logging audit
Related
Commands clear logging auditlog — clears audit log.
show logging
Display the logging settings and system messages logged to the internal buffer of the switch.
S6000
Syntax show logging [ number | history [reverse][ number ] | reverse
[ number ] | summary]
Parameters
number (OPTIONAL) Enter the number of messages displayed in the
output. The range is from 1 to 65535.
history (OPTIONAL) Enter the keyword
history
to view only
information in the Syslog history table.
reverse (OPTIONAL) Enter the keyword
reverse
to view the Syslog
messages in FIFO (first in, first out) order.
summary (OPTIONAL) Enter the keyword
summary
to view a table
showing the number of messages per type and per slot. Slots
*7* and *8* represent RPMs.
1376
Simple Network Management Protocol (SNMP) and Syslog