Dell Networking S6000 System, Reference Manual, Page: 901 / 1510

Version 7.4.1.0 Introduced on the E-Series.
debug lldp interface
To display timer events, neighbor additions or deletions, and other information about incoming and
outgoing packets, enable LLDP debugging.
S6000
Syntax
debug lldp interface { interface | all}{events | packet {brief |
detail} {tx | rx | both}}
To disable debugging, use the
no debug lldp interface { interface |
all}{events} {packet {brief | detail} {tx | rx | both}}
command.
Parameters
interface Enter the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
then the slot/ port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/ port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
NOTE: The
FastEthernet
option is not supported on
the S-Series.
all (OPTIONAL) Enter the keyword
all
to display information
on all interfaces.
events (OPTIONAL) Enter the keyword
events
to display major
events such as timer events.
packet (OPTIONAL) Enter the keyword
packet
to display
information regarding packets coming in or going out.
brief (OPTIONAL) Enter the keyword
brief
to display brief packet
information.
detail (OPTIONAL) Enter the keyword
detail
to display detailed
packet information.
tx (OPTIONAL) Enter the keyword
tx
to display transmit-only
packet information.
rx (OPTIONAL) Enter the keyword
rx
to display receive-only
packet information.
both (OPTIONAL) Enter the keyword
both
to display both receive
and transmit packet information.
Link Layer Discovery Protocol (LLDP)
901