show config
Display the current configuration of the selected VLAN.
S6000
Syntax
show config
Command
Modes
INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
S6000
Syntax
show vlan [brief | id
vlan-id
| name
vlan-name
]
Parameters
brief
(OPTIONAL) Enter the keyword
brief
to display the
following information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
• MAC address aging time
880
Layer 2
Summary of Contents for Networking S6000 System
