• 100% allows all traffic into the interface.
The decimal range is from 0.1 to 0.9.
wred-profile
name
E-Series Only: (Optionally) Enter the keywords
wred-
profile
followed by the profile name to designate a wred-
profile.
packets_per_se
cond
in
C-Series and S-Series Only: Enter the packets per second of
broadcast traffic allowed into the network. The range is from
0 to 33554431.
Defaults
none
Command
Modes
INTERFACE (conf-if-
interface-slot/port
)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
Version 7.4.1.0
E-Series Only: Added the
percentage decimal value
option.
Version 6.5.1.0
Introduced on the E-Series.
1394
Storm Control
Summary of Contents for Networking S6000 System
