manualshive.com logo in svg

Dell Networking S6000 System, Reference Manual

Share
Download
Dell Networking S6000 System Reference Manual Download Page 1425

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.1.1.0

Introduced on the E-Series.

Usage 
Information

The following describes the 

show ntp status

 command shown in the Example 

below.

Field

Description

“Clock is...”

States whether or not the switch clock is synchronized, 
which NTP stratum the system is assigned and the IP 
address of the NTP peer.

“frequency is...”

Displays the frequency (in ppm), stability (in ppm) and 
precision (in Hertz) of the clock in this system.

“reference time 
is...”

Displays the reference time stamp.

“clock offset is...”

Displays the system offset to the synchronized peer and the 
time delay on the path to the NTP root clock.

“root dispersion 
is...”

Displays the root and path dispersion.

“peer mode is...”

State what NTP mode the switch is. This should be Client 
mode.

Example

Dell#sh ntp status

Clock is synchronized, stratum 2, reference is 100.10.10.10

frequency is -32.000 ppm, stability is 15.156 ppm, precision 

is 4294967290

reference time is BC242FD5.C7C5C000 (10:15:49.780 UTC Mon Jan 

10 2000)

clock offset is clock offset msec, root delay is 0.01656 sec

root dispersion is 0.39694 sec, peer dispersion is peer 

dispersion msec

peer mode is client

Dell#

Related 
Commands

show ntp associations

 — displays information on the NTP master and peer 

configurations.

System Time and Date

1425

Summary of Contents for Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands