Dell Networking S6000 System, Reference Manual

Page: 1296 / 1510

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
If you configure a VRF for an SSH session, then you need not explicitly mention the
same VRF for the SSH client sessions intended for that VRF. The
vrf
attribute in the
ip ssh vrf
command is applicable for both the SSH client as well as the COPY
(SCP) commands.
Example
Dell(conf)#ip ssh vrf vrf1
Dell(conf)#do ssh 10.10.10.2 -l admin
Dell(conf)#no ip ssh vrf vrf1
show crypto
Display the public part of the SSH host-keys.
S6000
Syntax
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
show crypto key mypubkey {rsa | rsa1}
Parameters
Key Enter the keyword
key
to display the host public key.
mypubkey Enter the keyword
mypubkey
to display the host public key.
rsa Enter the keyword
rsa
to display the host SSHv2 RSA public
key.
rsa1 Enter the keyword
rsa1
to display the host SSHv1 RSA public
key.
NOTE: If you enable FIPS mode, this parameter is not
available.
Defaults none
Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
1296
Security