24
IPv6 Basics
IPv6 basic commands are supported on the Dell Networking platform.
NOTE: For information about the Dell Networking operating software version and platform that
supports IPv6 in each software feature, refer to the
IPv6 Addressing
chapter of the
Dell Networking
OS Configuration Guide
.
cam-ipv6 extended-prefix
Enable LPM partitioning to support IPv6 /65 to /128 route prefixes to be stored in Partition 1.
S6000
Syntax
cam-ipv6 extended-prefix
<Max-IPv6-prefixes>
To remove LPM partitioning configuration, use no cam-ipv6 extended-prefix.
Parameters
Max-IPv6-
Prefix
Maximum number of IPv6 prefixes in the mask length of /65
to /128. The possible values are 1024, 2048, and 3072.
Defaults
LPM is not partitioned with Partition 1 and therefore /65 to /128 prefixes are not
converted to /64 prefixes and are installed and saved in LPM. All the packets for
those routes traverse through the default route path.
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.1)
Introduced on the S6000.
Usage
Information
You can partition the LPM table to store IPv6 prefixes greater than /64 mask length.
Requires reboot of the switch to take effect as the SDK handles this only during its
initialization.
774
IPv6 Basics
Summary of Contents for Networking S6000 System
