Version 8.4.2.1
Introduced on the C-Series and S-Series.
Version 8.4.2.0
Introduced on the E-Series TeraScale.
Version 7.5.1.0
Introduced on the E-Series ExaScale.
redirect
Configure a rule for the redirect list.
S6000
Syntax
redirect {
ip-address
|
slot/port
} {
ip-protocol-number
|
protocol-type
[
bit
]} {
source mask
| any | host
ip-address
}
{
destination mask
| any | host
ip-address
} [
operator
]
To remove this filter, use one of the following:
• Use the
no seq sequence-number
command if you know the filter’s
sequence number.
• You can also use the
no redirect {
ip-address
|
slot/port
} {
ip-
protocol-number
[
bit
] |
protocol-type
} {
source mask
| any |
host
ip-address
} {
destination mask
| any | host
ip-address
}
[
operator
]
command.
Parameters
ip-address
Enter the IP address of the forwarding router.
slot/port
Enter the keyword
slot / port
followed by the slot/port
information.
ip-protocol-
number
Enter a number from 0 to 255 for the protocol identified in
the IP protocol header.
protocol-type
Enter one of the following keywords as the protocol type:
•
icmp
for internet control message protocol
•
ip
for any internet protocol
•
tcp
for transmission control protocol
•
udp
for user datagram protocol
bit
(OPTIONAL) For the TCP protocol type only, enter one or a
combination of the following TCP flags:
•
ack
= acknowledgement
•
fin
= finish (no more data from the user)
•
psh
= push function
•
rst
= reset the connection
•
syn
= synchronize sequence number
•
urg
= urgent field
1050
Policy-based Routing (PBR)
Summary of Contents for Networking S6000 System
