Field
Description
Interface
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), on which the PIM neighbor was
found.
Uptime/expires
Displays the amount of time the neighbor has been up then
the amount of time until the neighbor is removed from the
multicast routing table (that is, until the neighbor hold time
expires).
Ver
Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode
Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use the
ip pim
dr-priority
command)
• DR = Designated Router
• S = Sparse mode
Example
Dell#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.3.4 Gi 7/16 09:44:58/00:01:24 v2 1 / S
Dell#
show ip pim rp
View all multicast groups-to-RP mappings.
S6000
Syntax
show ip pim rp [mapping |
group-address
]
Parameters
mapping
(OPTIONAL) Enter the keyword
mapping
to display the
multicast groups-to-RP mapping and information on how
RP is learnt.
group-address
(OPTIONAL) Enter the multicast group address mask in
dotted decimal format to view RP for a specific group.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
1072
PIM-Sparse Mode (PIM-SM)
Summary of Contents for Networking S6000 System
