Dell Networking S6000 System, Reference Manual

Page: 909 / 1510

The E-Series generally supports the commands. However, LLDP-MED commands are more useful on the
C-Series and the S50V model of the S-Series, because they support Power over Ethernet (PoE) devices.
As defined by ANSI/TIA-1057, LLDP-MED provides organizationally specific TLVs (Type Length Value), so
that endpoint devices and network connectivity devices can advertise their characteristics and
configuration information. The Organizational Unique Identifier (OUI) for the Telecommunications
Industry Association (TIA) is 00-12-BB.
• LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge, can
communicate using IP, and uses the LLDP-MED framework.
• LLDP-MED Network Connectivity Device — any device that provides access to an IEEE 802 LAN to an
LLDP-MED endpoint device, and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell
Networking system is an LLDP-MED network connectivity device.
Regarding connected endpoint devices, LLDP-MED provides network connectivity devices with the ability
to:
• manage inventory
• manage Power over Ethernet (POE)
• identify physical location
• identify network policy
advertise med guest-voice
To advertise a separate limited voice service for a guest user with their own IP telephony handset or other
appliances that support interactive voice services, configure the system.
S6000
Syntax
advertise med guest-voice { vlan-id layer2_priority DSCP_value }
| {priority-tagged number }
To return to the default, use the
no advertise med guest-voice { vlan-id
layer2_priority DSCP_value } | {priority-tagged number }
command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority Enter the Layer 2 priority. The range is from 0 to 7.
DSCP_value Enter the DSCP value. The range is from 0 to 63.
priority-tagged
number
Enter the keywords
priority-tagged
followed the Layer 2
priority. The range is from 0 to 7.
Defaults Unconfigured.
Command
Modes CONFIGURATION (conf-lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Link Layer Discovery Protocol (LLDP)
909