![background image](http://html1.mh-extra.com/html/fastcabling/l2/l2_instructions_3564428001.webp)
L2+ Managed switch
Thank you for picking us over the competition. For years we have been a leading provider of PoE over cat5
and Power Fiber System. Please take a few minutes to read through this guide before you get started. Not
only there are some helpful tips, but also we have some guides to help you plan and install your switch.
Installation Requirements
If this product is for indoor application, pick the cat5e (or higher category) UTP cable. We recommend you choose
pure copper UTP cable. Pure copper not only can guarantee a maximum transmission distance, but also the
bandwidth.
NOTE: Do not expose this switch to a rain or moisture environment which may cause electric shock or fire. The
switch should be installed at places with a good ventilation system
Hardware Overview
Front Panel
Port
Description
1-16
10/100/1000 SFP slot.
17-24
RJ45 port - 10/100/1000 Ethernet
25-26
10/100/1000 SFP slot
Console
CLI connection – Baud Rate : 9600
Reset
Reset button the switch.
PWR
OFF: No power Green: Power ON
Data
(Link/ACT)
OFF-No Link
Red-10/100/1000mbps link flashing indicates data exchanging.
PWR
OFF: No power Green: Power ON