Dell Networking S6000 System, Reference Manual, Page: 867 / 1510

station-move-
violation (OPTIONAL) Enter the keywords
station-move
to allow a
station move on learned MAC addresses.
Defaults
• On S-Series, the default behavior is dynamic.
NOTE: “Static” means manually entered addresses, which do not age.
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version
8.3.12.0 Deprecated the
no-station-move
command (replaced by
the
mac-learning-limit mac-address-sticky
command).
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Added the
vlan
option on the E-Series.
Version 8.2.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series. Added the
station-move
option.
Version 6.5.1.0 Added support for MAC Learning-Limit on the LAG.
Usage
Information
This command and its options are supported on physical interfaces, static LAGs,
LACP LAGs, and VLANs.
If you do not specify the
vlan
option, the MAC address counters are not VLAN-
based. That is, the sum of the addresses learned on all VLANs (not having any
learning limit configuration) is counted against the MAC learning limit.
MAC Learning Limit violation logs and actions are not available on a per-VLAN
basis.
With the keyword
no-station-move
option, MAC addresses learned through this
feature on the selected interface persist on a per-VLAN basis, even if received on
another interface. Enabling or disabling this option has no effect on already learned
MAC addresses.
Layer 2
867